Unbeatable Pricing. Quality Products. Fast Turnaround
For Immediate Assistance Please Call:
1-800-548-6648

Products

Spray Nozzles

MINI SDX NOZZLE
The Mini SDX is a low-flow, easy to assemble nozzle, offers the same performance and technology as our larger SDX products, but for lower capacity applications.
The Mini SDX is a low-flow, easy to assemble nozzle, offers the same performance and technology as our larger SDX products, but for lower capacity applications. Hand tighten assembly with a maximum operating pressure of 345 BAR/5000 PSI and temperature of 149º C/300º F. Maximum operating temperature of 149º C/300º F.
SDX NOZZLE
The SDX is a classic eight part construction nozzle made from Stainless Steel and would typically be used for high pressure and high temperature applications.
The SDX is a classic eight part construction nozzle made from Stainless Steel and would typically be used for high pressure and high temperature applications. Torque tighten assembly with a maximum operating pressure of 482 BAR/7000 PSI. Maximum operating temperature of 538º C/1000º F (with metal seals).
SDX III NOZZLE
Hand tighten assembly with a maximum operating pressure of 345 BAR/5000 PSI. A further derivative capable of operation of 700 BAR/10150 PSI. Maximum operating temperature of 149º C/300º F.
The SDX III is a six part nozzle, of which the wear parts (orifice and swirl chamber) are interchangeable with the ‘Classic’ SDX. It features O-Rings for sealing so can be hand tightened, requiring no tools at all.
SDX V NOZZLE
The SDX V features eight part construction and is the world’s most user-friendly spray drying nozzle featuring an improved wear life/performance and effortless maintenance for the lowest cost of ownership.
The SDX V features eight part construction and is the world’s most user-friendly spray drying nozzle featuring an improved wear life/performance and effortless maintenance for the lowest cost of ownership. Hand tighten assembly with a maximum operating pressure of 345 BAR/5000 PSI and temperature of 149º C/300º F. Maximum operating temperature of 149º C/300º F.
COMPACT SDX NOZZLE
The Compact SDX is a new and improved nozzle, featuring easy to assemble, longer lasting parts. It mimics the Mini SDX in size but has a higher flow range with more spray angles.
The Compact SDX is a new and improved nozzle, featuring easy to assemble, longer lasting parts. It mimics the Mini SDX in size but has a higher flow range with more spray angles. Hand tighten assembly with a maximum operating pressure of 345 BAR/5000 PSI and temperature of 149º C/300º F. Maximum operating temperature of 149º C/300º F.
CONE FACED BODY FOR SDX SPRAY NOZZLE
These are designed to prevent build up of sprayed product on the nozzle face.
These are designed to prevent build up of sprayed product on the nozzle face and are available with cone angles of 70°, 80° and 90°. Special angles are available on request.
MULTI NOZZLE ADAPTERS
Delavan offers a range of multiple nozzle adapters for use in applications requiring two or more SDX nozzle assemblies.
Delavan offers a range of multiple nozzle adapters for use in applications requiring two or more SDX nozzle assemblies. The multi-adapter or cluster body can be used for all models and can be supplied with a butt-weld or threaded inlet connection to suit your requirements. When ordering please state number of nozzles and the inlet connection size on both the nozzle and adapter. Please also advise of any dimensional constraints for location of the complete assembly.
BUTT WELD ADAPTER FOR SPRAY NOZZLE
The nozzle inlet can be provided with a butt-weld connection to suit the customer’s existing pipe work sizes.
The nozzle inlet can be provided with a butt-weld connection to suit the customer’s existing pipe work sizes in place of the standard thread connection on request.
KWIK-CHEK ORIFICE GAUGES FOR SPRAY NOZZLE
The Kwik-Chek Orifice Gauge is designed for the rapid measurement of small hole diameters.
The Kwik-Chek Orifice Gauge is designed for the rapid measurement of small hole diameters. Models are available to cover a range of hole diameters from 0.010”-0.255” (0.25mm-6.5mm). These gauges work on the principle of the direct transfer of diameter measurements from a sliding, tapered needle to a linear scale readout graduated in 0.001” (0.02mm). Note: The Kwik-Chek Orifice Gauge is not suitable for Mini-SDX® nozzle.